Canon SADDLE FINISHER K3 Service Manual page 217

7) Disconnect the eight connectors [8], and
free the harness [9] from the cord
clamp.
8) Remove the screw [10], and detach the
PCB cover [11].
9) Disconnect the connector [12], and free
the harness [13] from the cord clamp
[14].
10) Move up the tray A to the topmost posi-
tion, and move down the tray B to the
bottommost position.
11) Remove the four screws [15], and de-
tach the holding tray unit. [16].
1.2.2 Removing the Paddle Unit
1) While lifting the swing guide, remove
the screw [1] to detach the paddle unit
[2].
When you have removed the
holding tray, you may detach
the paddle unit from the han-
Memo
dling tray unit.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
F03-102-04
[15] [16]
[15]
[13]
[14]
F03-102-05
F03-102-06
[9]
[8]
[15]
[15]
[10]
[11]
[12]
[1]
[2]
3-15