Handling Tray Unit; Removing The Handling Tray Unit; Removing The Handling Tray - Canon SADDLE FINISHER K3 Service Manual

CHAPTER 3 MECHANICAL SYSTEMS

1.2 Handling Tray Unit

1.2.1 Removing the Handling Tray

Unit
1) Remove the stack wall (upper).
2) Remove the stack wall (lower).
3) Free the two claws [1], and disconnect
the connector [2]; then, detach the de-
livery tray slope [3].
4) While pushing the two claws [4], slide
out the side guide (rear; [5]).
5) Slide out the saddle unit.
6) Remove the screw [6], and detach the
connector cover [7].
3-14
COPYRIGHT© 2001 CANON INC.
[1]
2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
[3]
[1]
[2]
F03-102-01
[5]
[4]
F03-102-02
[7] [6]
F03-102-03