Canon SADDLE FINISHER K3 Service Manual page 370

c. SW973
Setting
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
COPYRIGHT© 2001 CANON INC.
Item
Inlet motor operation
Buffer motor
operation
Delivery motor
operation
Folder motor
operation
Inserter motor
operation
Stack delivery motor
operation
Swing operation
Auxiliary tray
operation
Paddle operation
Solenoid, clutch
operation
Folder solenoid
operation
Finisher stapling
operation
Stapler slide
operation
T05-205-11
2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 5 TROUBLESHOOTING
Description
A press on SW976 rotates the motor. Another press
stops it.
A press on SW976 opens the swing guide. Another
press closes it.
A press on SW976 causes the auxiliary tray to move
outside the machine. Another press causes it to
move back inside the machine.
A press on SW976 causes the paddle to rotate for a
specific period of time. To rotate it thereafter, turn
off and then on the power and press SW976.
Each press on SW976 turns ON the following in
sequence: buffer path switch, upper path switch,
knurled belt, sub tray, saddle inlet, inserter pickup,
inserter stopper and inserter separation solenoids,
clutch. This is invalid if no option is installed.
Each press on SW976 turns ON the following in
sequence: folder inlet, B4 No. 2 stopper, B4 No. 1
stopper, unlocking, locking solenoid.
Each press on SW976 causes stapling operation.
Each press on SW104 moves the stapler from home
position, to front binding position, to rear binding
position, and then to 2-position binding position.
5-63