Canon SADDLE FINISHER K3 Service Manual page 372

Setting
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
COPYRIGHT© 2001 CANON INC.
Name
Buffer roller wrap-
ping adjustment
(feeding operation)
Buffer roller wrap-
ping adjustment
(adjustment input)
Punch motor
rotation
Punch registration
motor rotation
Punch sensor shift
motor rotation
Punch waste feed
motor rotation
Shutter separation
Inserter roller, belt
cleaning
RAM initialization
E505 setting
T05-205-13
2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 5 TROUBLESHOOTING
Description
See the descriptions for their respective items.
A press on SW976 executes punching operation.
Each press on SW976 causes the punch unit to move
from the home position, or to home position.
Each press no SW976 causes the punch paper edge
sensor to move from home position, or to home posi-
tion.
Each press on SW976 causes the punch waste feed
motor to rotate. Another press stops it. This operation
requires that the punch waste case be set in position.
Each press on SW976 repeats opening and closing
the shutter.
Each press on SW976 turns ON the inserter motor
and the separation clutch. Another press turns them
OFF.
When both SW976 and SW975 are held down for 3
sec or more, the RAM will be initialized.
When both SW976 and SW974 are held down for 3
sec or more, all counter items will be initialized.
In 10 sec after power-on, E505 is reset.
5-65