Canon SADDLE FINISHER K3 Service Manual page 231

6) Remove the two screws [9], and detach
the prism support plate [10].
7) Remove the E-ring [11] from the front
end of the buffer roller shaft, and detach
the bearing [12].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
[9]
F03-106-03
[10]
F03-106-04
F03-106-05
[9]
[12]
[11]
3-29