Adjusting The Tension Of The Feeding Belt - Canon SADDLE FINISHER K3 Service Manual

CHAPTER 3 MECHANICAL SYSTEMS
3.4.3 Adjusting the Tension of the
Feeding Belt
3.4.3-1 Feeding Belt A
Secure the screw [1] in place so that the
flange distance is 5 ± 1 mm.
3.4.3-2 Feeding Belt B
Secure the screw [3] in place so that the
slack of the feeding belt B [2] is 10 mm
when it is pushed using a tension gauge
with a force of 500 ± 100 g.
3.4.3-3 Feeding Belt C
Secure the screw [5] in place so that the
slack of the feeding belt C [4] is 10 mm
when it is pushed using a tension gauge
with a force of 500 ± 100 mm.
3.4.3-4 Feeding Belt D
Secure the screw [7] so that the slack of
the feeding belt D [6] is 10 mm when it is
pushed using a tension gauge with a force
of 500 ± 100 g.
3-80
COPYRIGHT© 2001 CANON INC.
[3]
[2]
[4]
10mm
2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
[6]
[7]
[5]
Front
F03-304-04
[1]
Back