Canon SADDLE FINISHER K3 Service Manual page 289

4) Close the inserter. At this time, be sure
to match the pin [4] of the inserter base
front with the hole [5] of the finisher
right upper cover.
5) Tighten the rear screw [6] of the inserter
right hinge rear. (You may hold down
the front of the inserter to facilitate the
work.)
6) Open the inserter, and tighten the two
screws [3] of the inserter hinge tempo-
rarily tightened in step 3).
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
F03-401-09
F03-401-10
[3]
F03-401-11
[4]
[5]
[6]
3-87