Canon SADDLE FINISHER K3 Service Manual page 144

3) The jogging plates wait at a position 10 mm from the edge of the paper.
4) When the next sheet of paper comes, steps 1) through 3) described above are repeated.
5) The paper is held for stitching. (Stitching is performed during this time.)
6) The jogging plates wait at a position 10 mm from the edge of the paper. (The stack is
then folded and delivered.)
7) When the first sheet of paper of the next stack reaches the paper sensor 1, the guides
move to a position 10 mm from the edge of the paper ready for the next alignment op-
eration.
COPYRIGHT© 2001 CANON INC.
F02-1203-11
F02-1203-12
F02-1203-13
F02-1203-14
2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 2 OPERATION OVERVIEW
2-113