Delivery Delay Jam (0092) - Canon SADDLE FINISHER K3 Service Manual

12.6.4 Delivery Delay Jam (0092)

a. Detection by delivery sensor
This occurs when the delivery sensor (PI52) fails to turn ON within the specified time af-
ter the paper retaining plate leading edge position sensor (PI56) has come ON.
Paper retaining plate
leading edge position
sensor (PI56)
Delivery sensor
(PI52)
Folding motor (M42)
T: 180mm feed
b. Detection by vertical path paper sensor
This occurs when the vertical path paper sensor (PI76) fails to turn OFF despite feeding
for the specified time after the delivery sensor (PI71) came on. (When the trailing edge of
the paper stack does not clear the vertical path paper sensor.)
Vertical path paper
sensor (PI57)
Delivery sensor
(PI52)
Folding motor
(M42)
T: ( paper length/2 -130) + 50mm feed
COPYRIGHT© 2001 CANON INC.
T
Normal
F02-1206-06
T
Normal
F02-1206-07
2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 2 OPERATION OVERVIEW
Paper retaining plate
leading edge position
sensor (PI56)
Delivery sensor
(PI52)
Folding motor (M42)
T: 180mm feed
Vertical path paper
sensor (PI57)
Delivery sensor
(PI52)
Folding motor
(M42)
T: ( paper length/2 -130) + 50mm feed
Note: 130mm is the length of the feed PATH
from the vertical path paper sensor to the
delivery sensor, and 50mm is the margin.
T
Jam
Load stop
T
Jam
2-133