Canon SADDLE FINISHER K3 Service Manual page 333

CHAPTER 5 TROUBLESHOOTING
b. Adjusting the Horizontal Registration
b-1 Misplacement 1
1) Loosen the two fixing screws [1] on the
inserter pickup tray.
2) Shift the inserter pickup tray [2] toward
the rear.
3) Tighten the two fixing screws.
4) Check the misalignment. If correct, end
the work. Otherwise, start with step 2 of
b-1. If the adjustment was in excess and
misalignment 2 has resulted, perform
the instructions under b-2.
b-2 Misalignment 2
1) Loosen the two fixing screws [1] on the
inserter pickup tray.
2) Shift the inter pickup tray [2] toward the
front.
5-26
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
[2]
[1]
F05-102-05
[2]
[1]
F05-102-06