Canon SADDLE FINISHER K3 Service Manual page 249

4) Remove the two screws [9] from the
cut-off on the left side of the saddle unit
inside cover [8], and detach the grip
[10].
5) Remove the five screws [11], and detach
the saddle unit inside cover [8].
6) Remove the three screws [13] of the left
middle rail [12].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
[8]
F03-201-04
[11]
F03-201-05
[13] [12]
F03-201-06
[9] [10]
[8]
[11]
[13]
3-47