Folder Drier Pcb - Canon SADDLE FINISHER K3 Service Manual

2.5.4 Folder Drier PCB

LED
LED792 Goes ON when 24 VZFLD/5V is supplied and the FANON signal goes ON. Goes
OFF when disconnected by the module disconnecting switch.
LED791 Indicates the result of adjustment on the feed path paper sensor 3 (S8) and the state
of paper detection:
Volume
VR791 Used to adjust the feed path paper sensor 3 (S8).
COPYRIGHT© 2001 CANON INC.
J791
LED792
J799
J798
J797
VR791
J796
F05-205-04
If ON, paper has been detected.
If flashing, paper has not been detected and the adjustment has been com-
pleted.
If OFF, sensor adjustment is recommended.
T05-205-05
T05-205-06
2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 5 TROUBLESHOOTING
J793
J792
LED791
J794
J795
Description
Description
5-59