Features - Canon SADDLE FINISHER K3 Service Manual

1 GENERAL DESCRIPTION

1.1 Features

a. Two types of stacking trays
• The product features two different stacking trays, tray A and tray B, which are used for
different purposes.
b. Large stacking capacity
• Tray A can accommodate a stack of paper up to a maximum height of 147mm, while
tray B can .accommodate a stack of paper up to a maximum height of 285mm (small
size) and 147mm (large size).
c. Wide range of paper types
• The product can accommodate a wide range of paper types, from 64 to 200mg/m
d. Stack job offset function
• The stack job offset function is available for the sorting of non-stapled stacks.
e. Three types of auto-stapling
• There are three stapling positions (front-slanted, rear-slanted, two-point).
f. Buffer rollers for increased productivity
• The buffer rollers mean that the copier can keep feeding paper even while the finisher is
stapling or off-setting.
g. Punch function
• The punch function allows holes to be punched in the paper before delivery, to allow the
paper to be filed in binders. (Accommodates 64 to 200mg/m
modate tracing paper or OHP film.)
h. Saddle-stitch function
• Up to 15 sheets of paper can be centre-stapled and folded in half before delivery.
i. Inserter function (requires accessory Inserter B1)
• This function allows the paper to be fed separately from the cassette. (Accommodates
2
64 to 200mg/m
Does not accommodate OHP film.)
j. Folding function (requires accessory paper folding unit C1)
• This function allows A3, B4 or 279.4mm x 431.8mm (11 x 17) size paper to be Z-
folded. Accommodates 64 to 200mg/m
COPYRIGHT© 2001 CANON INC.
paper, B5 to A3/279.4 x 431.8mm paper, including coloured paper.
2000 2000 2000 2000
CHAPTER 1 GENERAL DESCRIPTION
2
paper.
CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
2
2
paper. Does not accom-
.
1-1