Canon SADDLE FINISHER K3 Service Manual page 196

3) When the leading edge of the paper reaches inserter feed sensors 1 and 2, the separation
clutch turns OFF and the pick-up roller unit ascends. The stopper plate waits in the low-
ered position until the inserter paper set sensor is turned OFF.
Inserter pick-up sequence
nserter pick-up
solenoid (SL61)
Inserter stopper
solenoid (SL62)
Inserter pick-up
clutch (CL6I)
Inserter separation
sensors 1/2 (PI62/63)
Inserter paper set
sensor (S9)
COPYRIGHT© 2001 CANON INC.
F02-1405-03
Inserter pick-up
signal
F02-1405-04
2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 2 OPERATION OVERVIEW
OFF
SL61
Paper removed
2-165