Feeding/Delivery; Overview - Canon SADDLE FINISHER K3 Service Manual

CHAPTER 2 OPERATION OVERVIEW

2.2 Feeding/delivery

2.2.1 Overview

The machine sends sheets from the copier to tray A or tray B, according to the selected
mode of delivery, and performs job offset, stapling or punching in accordance with com-
mands from the copier.
Table 2-201 shows the motors used to feed or align sheets. These motors are rotated for-
ward or in reverse, as instructed by the finisher controller PCB.
The sensors shown in Table 2-202 monitor the arrival or passage of paper in the paper
path.
If paper fails to reach or clear a specific sensor within a specific period of time, the fin-
isher controller PCB will identify the condition as a jam, stopping operation and informing
the copier of the condition.
2-30
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001