Canon SADDLE FINISHER K3 Service Manual page 209

2) Open the front cover. Remove the screw
[1], and detach the spanner [2] from be-
hind the front cover.
3) Remove the four screws [3], and detach
the foot cover (front; [4]) and the foot
cover (rear; [5]).
4) Disconnect the finisher from the copier.
(See 1.1.3/3.2.1.)
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
[2]
F03-101-13
[3]
[5]
F03-101-14
[1]
[4]
[3]
3-7