Canon SADDLE FINISHER K3 Service Manual page 251

2.1.2 Removing and Mounting
the Folding Roller
2.1.2-1 Removing the Folding Roller
1) Slide out the saddle unit.
2) Disconnect the two connectors [1].
3) Disconnect the connector [2] of the
saddle jam LED PCB, and free the har-
ness [3] from the tie-wrap [4].
4) Remove the three screw [5], and detach
the stitcher base unit fixing plate (front;
[6]).
5) Remove the two screws [7], and detach
the stay [8].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
[1]
F03-201-09
[2] [4]
F03-201-10
[8]
[5]
F03-201-11
[1]
[3]
[7]
[7]
[6]
3-49