Daikin VAM-FA8VE Technical Data Manual page 77

7 Product Specification
7-2 Optional accessories
7-2-9 DST301B61: Schedule timer
A. Change/cancel partially
4
Press OK button if you do not want to change the
timer on. The display of the next programmed time flashes.
Each time you press it, the next area to be set flashes.
OFF OFF AM
1 2 3 4 5 6 7
MON TUE WED THU FRI SAT SUN
NO.
5
FRI
CLOCK
PM
5
Press the HOUR/MINUTE BUTTON and change the
programmed time. Press the OK BUTTON, and finalize the
setting of change.
SET 1
OFF OFF AM
1 2 3 4 5 6 7
MON TUE WED THU FRI SAT SUN
NO.
5 SET 2
FRI
CLOCK
PM
6
Press the PROGRAM CANCELING BUTTON, and cancel
the programmed time. If you press it again, display returns
to the original state. Press the TIMER ON BUTTON to finalize
the cancellation.
SET 1
OFF OFF AM
1 2 3 4 5 6 7
MON TUE WED THU FRI SAT SUN
NO.
5 SET 2
FRI
CLOCK
PM
SET 1
OFF OFF AM
1 2 3 4 5 6 7
MON TUE WED THU FRI SAT SUN
NO.
5
SET 2
FRI
CLOCK
PM
In the same procedure, cancel the programmed time of system off 2.
• HRV • VAM-FA8VE
Shift to the display
SET 1 ON OFF
PM
"PROGRAMMED
SET 2 ON OFF TIME OF SYSTEM
PM PM
OFF".
Change the
ON OFF
PM
programmed time
ON OFF
of system OFF p 1
PM PM
to 7:00 p.m.
ON OFF
Shift to the
PM
programmed time
ON OFF
PM PM
of system start 2.
Set the
ON OFF
programmed time
PM
of system start 2
ON OFF
PM AM PM
to program
cancellation.
(HC0186)
• HRV • Heat Reclaim Ventilation
B. Cancel the whole
7
Press the BUTTON FOR SELECTING DAYS OF A WEEK, and
shift to the day of the week to be canceled. Then, press the
HOLIDAY SETTING BUTTON; the display "OFF" appears at the top
of the particular day of the week. The programmed time is
canceled. If you press the button again, the display returns to the
original state.
SET 1
OFF OFF
1 2 3 4 5 6 7
MON TUE WED THU FRI SAT SUN
NO.
5
SET 2
FRI
CLOCK
PM
8
Press the PROGRAMMING START BUTTON. The
program setting is now finished.
Notes:
• Unless the button is pressed within 20 minutes, the display
will automatically revert back to the original state. In this
case, setting contents to the point where the TIMER ON
BUTTON (or HOLIDAY SETTING BUTTON or BUTTON FOR
COPYING PROGRAM OF PREVIOUS DAY) is pressed will only
take effect.
• To continue the change/cancellation, do not press the
PROGRAMMING START BUTTON until all change/
cancellation are completed.
• The operation controlled by timer is executed even while the
program is being set.
Shift the day of
ON OFF
the week to
ON OFF
Thursday to set as
a holiday.
1
7
75