Daikin VAM-FA8VE Technical Data Manual page 215

• HRV • VKM-GA(M)V1
The HRV unit cannot be operated independently when the air conditioner is connected to the HRV
unit via a duct. When using the HRV unit, set the air conditioner to "fan" mode on weak fan strength.
• Each time you press the operation selection button, the operation mode display will change as
shown in the figure below.
Example 1 :
In case of the remote controller "BRC1D527" and as equivalent.
Display changes as below.
When air conditioner and HRV
unit are not connected via duct
<Operation mode>
VRV:
Cooling mode
HRV:
Heat exchange mode
VRV:
Fan mode
HRV:
Heat exchange mode
VRV:
Stopping
HRV:
Heat exchange mode
Note
Current Ventilation mode can be visible and selected on the remote controller.
• HRV • Heat Reclaim Ventilation
Operation mode display
"Ventilation" is displayed.
Remote controller for indoor unit
When air conditioner and HRV
unit are connected via duct
VRV:
Cooling mode
HRV:
Heat exchange mode
VRV:
Fan mode
HRV:
Heat exchange mode
Operation mode
selector button
<Operation mode>
2
8
213