Daikin VAM-FA8VE Technical Data Manual page 31

7 Product Specification
7-2 Optional accessories
7-2-3 KRP2A51, KRP2A61: Wiring adapter for electrical appendices
(Concealed) floor standing unit
PCB support
Electrical wiring
1. First, wire between the indoor and outdoor units, then to the separate power
sources, and between the indoor units and the remote controllers. Then, check
wiring is correct. (If wanting group control by remote controller, check transmission
wiring.) For details, see the installation manual of the indoor and outdoor units.
2. Next, wire between the wiring adaptor for electrical appendices (1) and the indoor
units. For details, see Wiring to indoor units.
3. Finally, wire between external units such as the host computer monitor panel, and
make the necessary settings. For details, see Wiring to external units (host computer
monitor panel).
Note:
It is not necessary to set address No. for centralized control. (Setting is automatic.)
• HRV • VAM-FA8VE
Electric parts box
Adapter
(KRP2A61 • 51)
• HRV • Heat Reclaim Ventilation
P board ass'y
1
7
(HC0250)
(HC0122)
29