Daikin VAM-FA8VE Technical Data Manual page 23

7 Product Specification
7-2 Optional accessories
7-2-1 BRC301B61: Remote control
7-2-1-1 Remote control mounting instructions
1. Remove the upper part of remote control.
Insert minus screwdriver into the
slots in the lower part of remote
controller (2 places), and remove
the upper part of remote control.
The PC board is mounted in the
upper part of remote controller.
Be careful not to damage the board
with the minus screwdriver.
2. Fasten the remote control.
For exposed mounting, fasten
1
with the included wood screws (2).
For flush-mounting, fasten with
2
the included machine screws (2).
For the field supplied switch box, use optional accessories KJB111A or KJB211A.
NOTE
Choose the flattest place possible for the mounting surface. Be careful not to
damage the shape of the lower part of remote controller by over-tightening the
mounting screws.
• HRV • VAM-FA8VE
Minus screwdriver
Machine Screws
(M4 x 16)
• HRV • Heat Reclaim Ventilation
Upper Part of
Remote Controller
Lower Part of
Remote Controller
Insert the minus
screwdriver and twist
lightly to remove.
Wood Screws
(φ 3.5 x 16)
Switch Box
(Field supplied parts)
1
7
(HC0111)
2P034150
21