Daikin VAM-FA8VE Technical Data Manual page 74

7 Product Specification
1
7-2 Optional accessories
7-2-9 DST301B61: Schedule timer
7
OPERATION SETTING PRESENT
TIME (Fig. 3)
(Example) In case of setting Friday, 5:30 p.m.
1
Press the CLOCK ADJUSTING BUTTON. The present
time display flashes.
Note:
The present time needs adjusting in case of turning power
supply on for the first time or the occurrence of power failure
over the period of 48 hours or more.
1
MON
CLOCK
2
Press the BUTTON FOR SELECTING DAYS OF A WEEK.
Each time the button is pressed, the day display shifts to the
right.
Note:
The display "MON" follows the display "SUN".
CLOCK
3
Set the time with the HOUR/MINUTE BUTTON. Each
time the HOUR/MINUTE BUTTON is pressed, the display is
put forward minute by minute and hour by hour.
When the button is kept pressed, the display is put forward
continuously.
Notes:
• After becoming "AM 11:00", when the button is pressed, the
display becomes "PM 0:00".
• After becoming "59" (minute), when the button is pressed,
the display becomes "00" (minute).
72
• HRV • VAM-FA8VE
AM
5
FRI
Set the day
AM
to Friday.
• HRV • Heat Reclaim Ventilation
5
FRI
CLOCK
PM
4
Press the TIMER ON BUTTON the moment the time
signal of TV, radio, telephone, etc. is heard. The mark " : "
flashes, and the clock starts.
5
FRI
CLOCK
PM
Notes:
• The clock used is of 12-hour type.
• When you turn power supply on, the system may display "
for about one minute and not start to operate after all the
liquid crystal displays appear at a time.
• If the CLOCK ADJUSTING BUTTON is pressed by mistake, press
it again to return to the original state. As the clock does not
stop, the time indicated by the clock is kept correct. In case of
power failure within 48 hours, the clock keeps operating by
utilizing the built-in battery.
Set the time to
5:30 p.m..
Press the TIMER ON
BUTTON in tune
with the time signal
at 5:30 p.m.
"
88
(HC0184)