Daikin VAM-FA8VE Technical Data Manual page 39

7 Product Specification
7-2 Optional accessories
7-2-4 KRP1B61: Interlock adapter of VRV
Electric Wiring
• Refer to the WIRING DIAGRAM attached to the indoor unit before attempting to wire.
[Make sure wires to units do not pass over the PC board when wiring.]
• Wire the adapter to the indoor unit as shown below,
X2A
1. Fetching the operation display signal
• Attaching an hour meter
Output is generated at the contact while the
compressor is running.
Example :
X1
HM
X2
2. If optional accessories are installed (auxiliary electric heater, humidifier)
• Wire correctly in accordance with the attached installation manual.
• Refer to the wiring diagram applied to the indoor unit when running electric wiring.
• HRV • VAM-FA8VE
X1A
Blue
N
L
Red
HM: Hour meter
(Part to be procured in the field)
AC
220 – 240 V
(HC0132)
• HRV • Heat Reclaim Ventilation
X16A
Indoor unit PC board
• Fan ON display
Output is generated at the contact while the fan is
running.
RL: Operation lamp
Example :
X3
RL
X4
(HC0131)
(Part to be procured in the field)
AC
220 – 240 V
(HC0133)
1
7
37