Nortel BCM50 Configuration Manual page 54

54
Section 1: System telephony
Table 2 Hunt group tables (Continued)
Field Values
DN <DN>
Appearance Type Appear & Ring
Appear Only
Ring Only
lists first second and third as
options
Action
ADD button 1. On the Hunt Groups table, select the group where you want to add members.
2. In the Members box in the lower frame, click the Add button.
3. Enter the DN for the telephone you want to add as a member.
4. Enter an Appearance Type.
Delete 1. On the Hunt Groups table, select the hunt group where you want to delete members.
2. In the Members box in the lower frame, click the DN row to be removed.
3. Click the Delete button located under the Members box.
Up Member order within a Hunt group is important. The member order determines how a call routes
through a Hunt group when the group is set to either linear or rotary mode.
Down
1. Click a member from the member list.
2. Click either the Up or the Down button. The system automatically reorders the list.
Line Assignment
Lines <line #>
Action
Add Multiple lines can be assigned to Hunt groups. However, a line can only exist in one Hunt group.
Programming note: Lines assigned to line buttons on individual telephones take precedence
over the lines assigned to Hunt group buttons. Therefore, we recommend that you do not assign
lines to individual telephone DN records for telephones that are part of a Hunt group.
1. On the Hunt Groups table, select the hunt group where you want to add lines.
2. In the Line Assignment box in the lower frame, click the Add button.
3. Enter line numbers.
Delete 1. On the Hunt Groups table, select the hunt group where you want to delete lines.
2. In the Line Assignment box in the lower frame, click the Delete button.
3. Click OK on the confirmation dialog.
N0027146 [Publish Date]
Description
This is the DN of the telephone assigned to this hunt group.
Choose the setting that suits the telephone and the environment:
Appear & Ring: Appears on a button with indicator, which
flashes when a call comes in, and it also rings.
Appear Only: Appears on a button with indicator, which flashes
when a call comes in.
Ring Only: Telephone rings when a call comes in. (7000 and
7100 digital phones and telephones that have no available
programmable memory buttons with indicators.)
These are the lines/target lines that are assigned to the hunt
group. Ensure that they are not also assigned to any of the
member telephones.
Configuring Hunt Groups