Outgoing Call Restrictions - Nortel BCM50 Configuration Manual

Configuring telephones: Digital telephones
Use the Add button to enter external number that will be dialed and the facility the system will
1
use to dial out the number.
Enter a unique name for each speed dial. This name displays for incoming calls that match the
2
external number.
Program the speed dial code onto telephone buttons, and label.
3
Next step: "Outgoing call restrictions" on page 85
4

Outgoing call restrictions

Restriction filters determine what dialing strings are allowed or blocked from the user. You can
specify restriction filters specific to the telephone, as well as filters that are specific to a line
assigned to the telephone.
Programming reference:
• "Restrictions main tab" on page 113
• restriction filters
• line restrictions
• CoS passwords
Select the field that you want to modify.
1
Set Lock: Determine how much programming the user will be able to perform at their
2
telephone. (None, Partial, Full)
Refer to "Restrictions main tab" on page 113
level.
Allow last Number: Enter Y if you want to allow Last-number redial for numbers dialed from
3
the telephone.
Allow Saved Number: Enter Y if you want to allow redialing a saved number.
4
Allow Link: Set this to Y only for analog telephones.
5
Set restrictions
Assign restriction filters for the schedules that will affect this telephone.
Programming reference:
• "Restrictions - Set Restrictions tab" on page 114
• Restriction filters
for a description of what is allowed for each
BCM50 Device Configuration Guide
85
Section 2: DN records