Contrast Adjustment; Select How You Dial Your Calls - Nortel BCM50 Configuration Manual

154
Section 3: Features

Contrast adjustment

Adjust the contrast on the telephone through the system:
DN record//cap and user pref//user pref//contrast
Adjust the contrast using the telset interface:
Terminals and Sets//User prefrnces//contrast
Adjust the contrast of your display at the telephone.
Press FEATURE *7.
1
Press a number from 1 to 9 (depending on your telephone).
2
Press HOLD to set your choice.
3

Select how you dial your calls

The system digital telephones provide three methods for dialing calls:
• Standard dial: allows you to make a call by selecting a line and dialing the number. If you
have a prime line, it is selected automatically when you lift the handset or press the handsfree
button.
• Automatic dial: allows you to dial a number without selecting a line. Your prime line is
selected when you start dialing a number. Your Prime line must be free to make a call.
• Pre-dial: allows you to enter a telephone number, check it, then change it before making the
call. The call does not dial until you select a line or line pool, or pick up the handset. You can
pre-dial both external and internal numbers. You must, however, select the correct type of line
(external or internal) for the type of number you have entered.
Programming:
• System settting: Note that not all telephones allow all three types of dialing.
DN record//user pref//dialing options
• Programming call dialing through the **CONFIG telset interface:
Terminals and Sets//User prefrncs//dialing opt'ns
• Programming call dialing on a telephone
Press FEATURE *82.
1
Press # to select the mode.
2
Press HOLD to store the mode.
3
N0027146 [Publish Date]
Telephony features