Nortel BCM50 Configuration Manual page 171

Feature configuration: Answering calls
Call Forward and voice mail: If you want a voice mail system to pick up unanswered calls:
• use the internal number of your voice mail as the destination when you program Forward no
Answer and Forward on busy
• if your voice messaging system or service automatically retrieves calls, make the ring delay
greater than the delay used by your voice mail system
• if the voice mail system is on a remote system, ensure that the correct routing codes are added
to the voice mail forwarding dial string.
• if calls are being forwarded to telephones or voice mail outside the system, ensure that Allow
redirect is set for the telephones.
Using Call Forward at the telephone
Get the DN (internal) or the routing code and telephone number (external private network) for
1
the destination telephone.
Enter FEATURE 4.
2
Enter the dial string for where you want your calls transferred.
3
Cancel feature: FEATURE #4
Blocking programming at the telephone: You can block the user from using call forward for all
calls by setting the Set Lock restrictions for the telephone to complete restriction.
Section 3: Features
BCM50 Device Configuration Guide
171