Common Display Prompts - Nortel BCM50 Configuration Manual

192
Section 3: Features

Common display prompts

These prompts can appear during general call features:
Display prompt
Key: NNN = DNs#; SSS = second DN#; XXX = line number; YYY = second line number
01:9___
CANCL BKSP OK
3 parties only
NNN 02:47
XXX <LINENAME>
SHOW OK
NNN: Busy
NEXT VIEW
NNN: Idle
NEXT VIEW
NNN <SETNAME>
NEXT VIEW
NNNNNNNNNNNNN...
‚
VIEW OK
NNN>SSS
CANCL RETRY JOIN
NNN DND
CALLBCK
NNN no reply
CALLBCK
N0027146 [Publish Date]
Description of error or action
Double SS symbols indicate a long distance call. (May be available with Call
Display services.)
Speed dial: Continue entering the number you want to program. You can
change the number by pressing BKSP or the volume bar. When you are
HOLD
finished, press or OK.
Conference call: You are trying to add a fourth party to your conference call,
or to join two conferences together.
Release one call from the conference before adding another, or keep the
two conferences separate.
Call duration timer: The display shows the last call you made, or the total
elapsed time in minutes and seconds on a current call.
Button inquiry: The display shows the number and name of the line. Press
SHOW to view the redirection status of the line.
Hunt group: The hunt group member the hunt group member is in a
conference, and the supervisor cannot break in. The display briefly shows
Conference busy and then reverts to this prompt.
Hunt group: The hunt group member currently is not handling a call.
Button inquiry: The display shows the directory number of the telephone,
and the assigned name. Press NEXT to see the first line assigned to ring at
the intercom button.
Press # or press VIEW‚ or ·VIEW to view a number that is too long to fit on
the display. Press OK when you have finished.
Transfer: You are talking to the person you want to transfer the call to. Press
RETRY if you decide to transfer the call to another person. Press
JOIN to transfer the call.
Camp-on: The person to whom you redirected a call has Do Not Disturb
active. The call has come back to you. Press the CALLBCK button or the line
button to reconnect to the call. On 7000 and 7100 digital phones, just pick up
the handset.
Transfer: The person to whom you tried to transfer a call did not answer.
Press CALLBCK or the flashing line button to reconnect to the call. On 7000
and 7100 digital phones, lift the handset to reconnect.
Display prompts and messages
RLS
or