Telephony Features; Features To Set Up Telephone Set Features - Nortel BCM50 Configuration Manual

Telephony features

Feature programming has two aspects. Some features are set for all telephones/devices and some
features are set on an individual basis in the DN record.
These sections divide system features in terms of how they are used. Each feature section contains
both system programming and how the feature is used at the telephone.
• "Features to set up telephone set features" on page 153
• "Feature configuration: Answering calls" on page 157
• "Feature configuration: Making calls" on page 209
• "Global IP features" on page 223
• "Using telephones for special features" on page 181
• "Setting up auxiliary features" on page 233
Refer to the Telephone Feature User Guide for a quick reference about using the system features.
Also refer to:
• "System features and feature codes" on page 255
• "Relocating telephones" on page 235

Features to set up telephone set features

These codes allow you to adjust features on how your telephone set works. These features are only
available to digital and IP telephones.
(quick reference list of codes)
BCM50 Device Configuration Guide
153
Section 3: Features