Using The Hot Desking Feature - Nortel BCM50 Configuration Manual

228 Global IP features
• If the target telephone has a headset, but the originating telephone does not, once hot desking
is activated the headset on the target telephone will no longer work. To correct this situation,
you need to cancel hot desking, plug a headset into the originating telephone, then re-establish
hot desking at the target telephone.
Originating telephone

Using the hot desking feature

Using hot desking requires that you set up a password and permission on the originating telephone
and activate hot desking from a target telephone.
Setting up a password and allowing hot desking
Set up the password on the originating telephone. This process also allows you to determine if you
want the telephone to be able to be diverted.
Enter FEATURE *999.
1
Press ADMIN.
2
Enter a new password, or change an existing password, and press OK.
3
N0016866
Target telephone
Head set feature active on target set after
hot desking?
Yes
No
No
Section 3: Features