Nortel BCM50 Configuration Manual page 229

Section 3: Features
Confirm the password, and press OK.
4
Allow/disallow hot desking, as required by pressing CHANGE.
5
Press QUIT to exit.
6
Resetting the Hot Desking password
The Hot Desking password can be reset from system programming. This allows users who forget
their passwords to re-enter hot desking and to reset their password.
Note: This process also cancels hot desking for the telephone, if the
application is currently active.
Also refer to "Notes about Hot Desking" on page 420.
To reset the Hot Desking password field for a specific IP telephone:
You can access the reset button from two locations:
1
• Resources//Telephony Resources//IP telephony//Terminal Details tab
• Telephony//System DNs//IP Terminal Status tab
From the top list, select the IP telephone where you want to reset the password.
2
Click Reset Hot Desking Password.
3
Click OK on the dialog box to reset the password.
4
The password resets to Null. The user can enter hot desking again to enter a new password.
Using hot desking feature to divert an IP telephone configuration
You perform this procedure at the target telephone, where the diverted calls are to be answered.
Ensure both telephones are on-hook before attempting to activate this feature.
1
Enter FEATURE *999.
2
Press DIVERT.
3
Enter the DN of the telephone you want to divert to this telephone.
4
Note: If the originating telephone does not allow hot desking, a Not
allowed prompt displays. This prompt also occurs if the originating
telephone is on a call when the diversion command is issued.
Enter the password of the diverted telephone.
5
Global IP features 229
BCM50 Networking Configuration Guide