Nortel BCM50 Configuration Manual page 104

104
Section 2: DN records
Table 7 Capabilities and Preferences - Capabilities panel fields (Continued)
Attribute Values
Auto hold <checkbox>
Allow redirect <checkbox>
Redirect ring <checkbox>
Receive short tones <checkbox>
OLI as Called Number
Silent monitor <checkbox>
supervisor
N0027146 [Publish Date]
Description
This setting determines if the system will automatically put an active call on
hold if you answer or initiate another call.
If you do not select this box, the system drops the active call, unless you
press the HOLD button first, if you answer a call or initiate another call.
A selected box is the default.
The user can change the Auto hold setting at their telephones by pressing
FEATURE 73.
SWCA note: Ensure this setting is selected for any telephones with
configured System wide call appearance (SWCA) keys. Refer to
calls by parking on SWCA buttons" on page
Define whether this telephone will allow assigned lines to be redirected.
This must be selected to allow call forwarding outside the network (external
call forward), including calls to a centralized voice mail system over a private
network.
Define whether the telephone rings briefly when a call on one of its lines is
redirected by the Line Redirection feature (FEATURE 84).
Also refer to "Trunk/Line Data, main panel" in the BCM50 Networking
Configuration Guide (Redirect to: for lines).
Analog equipment that is connected to the system with an internal or external
analog terminal adapter (ATA2), responds only to tone dialing signals.
If you have analog equipment connected to a station port, select this setting.
Otherwise, do not select Receive short tones.
ISDN. feature has been removed
On two-line display telephones only, you can choose whether the telephone
can be used to allow the Silent Monitor feature. Select the checkbox to allow
this feature on this telephone.
Refer to "Silent Monitor" on page 28
system settings for the Silent Monitor feature, including determining how
many telephones can be allowed to use this feature. Refer to
individual calls" on page 61
DN records parameters
174.
for information about setting up the
for instructions about using FEATURE *550.
"Sharing
"Monitoring