Restrictions - Set Restrictions Tab; Table 15; Table 35 Restrictions - Set Restrictions Tab Fields; Table 36 Schedule Filter Defaults - Nortel BCM50 Configuration Manual

114
Section 2: DN records

Restrictions - Set Restrictions tab

You can assign restrictions that apply to a specific telephone record. You can also assign a
different restriction filter for Normal service and for one or more of six other schedules, which
would allow the user to have different access at different times of the day. See
settings and services scheduling" on page 37
Figure 13 Restrictions - Set Restrictions tab panel
Table 35 describes the fields on this panel.
Table 14 Restrictions - Set Restrictions tab fields
Setting Values
Schedule Normal
<Sched 1-6>
Use Filter <XX>
The table below provides a list of default restriction filters.
Table 15 Schedule filter defaults
Schedule
Normal
Schedule 1 (Night)
Schedule 2 (Evening) 12
Schedule 3 (Lunch)
N0027146 [Publish Date]
for more information about the schedules.
Description
The Normal schedule runs when no other schedules are active.
If schedules are being used, select the relevant schedule and enter the
required filter.
Enter the restriction filter you want to be active for each schedule that you
use.
Restriction filter (defaults)
02
11
13
DN records parameters
Schedule Restriction filter (defaults)
Schedule 4 00
Schedule 5 00
Schedule 6 00
"System schedule