Programming Cap/Kim Buttons; Managing Lines On A Kim - Nortel BCM50 Configuration Manual

132
Section 2: DN records
• Legacy equipment notes: A SAPS is required for 7324 digital phones that have one or more
CAP modules attached.

Programming CAP/KIM buttons

Designating features or autodial numbers to the eKIM buttons can be performed using the
CAP/KIM Button Programming screen.
To program module buttons, follow this procedure:
On the system DNs screen.
1
Select the Capabilities and Preferences tab.
2
Select the DN for the CAP you want to configure.
3
In the lower panel, click on the CAP/KIM Button Programming tab.
4
Select the line for the button number that you want to program.
5
Configure the feature or autodial on the button.
6
For a detailed description of each field, refer to
Programming tabs" on page
Note: You cannot assign lines, target lines, or Hunt group indicators using button
programming. This must be performed through assigning lines to the telephone
Access - Line Assignment tab" on page
telephone as a Hunt group member
lines are then either moved to the modules or overflow to the module if the telephone
buttons cannot accommodate the new settings.
You cannot assign Hunt group DNs as an autodial button on the KIM modules.

Managing lines on a KIM

If the 7316E+KIM is configured as an eCAP, you can move lines onto the module using
FEATURE *81 on the telephone. You can also reassign Hunt group designators to the KIM
module by using the same feature.
You can also force lines onto the KIM by assigning more lines than the telephone buttons can
support. Extra lines automatically flow over to the module, but they flow sequentially, starting on
the top left at button 01. Also, they overwrite any existing programming on the KIM, except
existing line or hunt group (KIM) assignments.
Any of the buttons on your KIM that do not have assigned lines can be programmed to dial
internal or external numbers automatically, or to access a feature. Refer to
KIM buttons.
N0027146 [Publish Date]
"Capabilities and Preferences - Button
109.
96), and, for hunt groups, configuring the
("Hunt Group members and lines" on page
Setting up Central Answering Positions
Programming CAP/
("Line
53). These