Common Procedures: Copying And Renumbering Dns; Copying Settings To Other Dns; Table 21 Copy Values - Nortel BCM50 Configuration Manual

Common procedures: copying and renumbering DNs

Tasks: Understanding common tasks
• "Copying settings to other DNs" on page 87
• "Renumbering DNs" on page 88

Copying settings to other DNs

The Copy command allows you to duplicate programming for a telephone and apply it to another
telephone, a range of telephones, or to all the telephones on the system. If information is copied to
a record with an assigned telephone, the copy information replaces the existing settings.
Note: Unique configurations, such as the Name, do not copy over.
Follow these steps to copy telephone configurations:
Click on the keys beside Services, Telephony Services, System DNs, and Active Set DNs.
1
Click the DN number for the record that has the settings you want to copy.
2
If you want to copy a specific part of the record, open the DN record and pick the heading you
want to copy, such as Line Access or Capabilities.
On the Edit menu, click Copy.
3
The following panel appears, depending on which heading you selected:
The following table describes the fields that appear in the various copy panels. Choose the
4
settings that will set up the system to copy the information you want to the DNs you specify.
Table 1 Copy values
Attribute
Data type
Value Description
System data Only available on DN copy panel.
System+user data
Section 2: DN records
BCM50 Device Configuration Guide
87