Restrictions - Line/Set Restrictions Tab; Table 37 Restrictions - Line/Set Restrictions Fields - Nortel BCM50 Configuration Manual

DN records parameters

Restrictions - Line/Set Restrictions tab

The Line/set restrictions settings allow you to assign a restriction filter to a specific line for
outgoing calls at a specific telephone. This type of filter replaces any line or set restriction filters
that can otherwise apply. Line/set restrictions restrict the numbers the user can dial on a line, but
only from that telephone. The same line on another telephone can have different restrictions.
You can apply a different line restriction for normal service and for each of the six schedules.
Figure 14 Restrictions - Line/Set Restrictions panel
Table 37 describes the fields on this panel.
Table 16 Restrictions - Line/Set Restrictions fields
Setting Values
Line <XXX>
Schedule Normal
Night
Evening
Lunch
Sched 4
Sched 5
Sched 6
Use Filter <XX>
Description
This is a list of lines that are assigned to this telephone. Define a restriction
filter for each line under the schedules that you intend to use.
Restriction filters are defined under Restrictions.
Always configure a Normal filter, as this schedule runs if there are no other
schedules running.
If your system is using schedules, for instance, if you require different
restrictions on lines at different times of the day, choose an alternate
schedule that coordinates with the other programmed schedules on your
system.
Enter the restriction filter you want to be active for this set on this line for each
schedule that you use.
Section 2: DN records
BCM50 Device Configuration Guide
115