Nortel BCM50 Configuration Manual page 261

System features and feature codes
Table 2 Button Programming Feature settings (Continued)
Set
command
Feature
(FEATURE
<code>)
65 Reply message
#65 Cancel Message
Waiting
66 Voice call
67 Saved Number Redial Allows the user to redial a number that they saved while on the
68 Restriction override
69 Priority Call
70 Transfer
71 Link
72 Timed Release
74 Call Park
*520 Find available SWCA
key
*521 to *536 System Wide Call
Appearance (1 to 16)
*537 Find oldest SWCA call System will search among the SWCA keys assigned to the
*538 Find newest SWCA
call
*550 Silent Monitor
75 Group Pickup
76 Directed Pickup
77 Call Timer
78 Pause
79 Exclusive Hold
Description
Allows the user to access messages and send a reply to the
message sender.
Allows the user to cancel the message waiting indicator.
Allows the user to make an announcement or begin a call through
the speaker of another telephone.
call.
Allows the user to override any restrictions for the call they are
trying to dial.
Allows the user to access a telephone that is currently busy.
Allows the user to transfer an existing call to another telephone.
Activates the Link command, which allows the user to access
special features on a remote PBX system.
(NOT ACTIVE)
Allows the user to park a call on another telephone in the system.
System will search for a free SWCA key among the SWCA keys
that are assigned to the current telephone.
Non-intercom calls are associated with an available SWCA key
when the call is answered or originated, or put on Hold.
Features that interact with this feature: Hold, telephone keys,
outgoing and incoming calls.
telephone, and unpark the call that has been parked the longest.
System will search among the SWCA keys assigned to the
telephone, and unpark the call that has been most recently
parked.
Monitor hunt group calls. (Telephone must be assigned with SM
supervisor.)
Allows the user to answer a call made to another set within the
Pickup group.
Allows the user to answer any telephone that rings within the
system.
Allows the user to see how long a call lasted.
Allows the user to insert a pause during a dialing sequence.
Allows the user to put a call on hold at the current telephone. All
appearances of the call on other telephones indicate the line is
busy.
Section 3: Features
BCM50 Device Configuration Guide
261