Nortel BCM50 Configuration Manual page 201

Display prompts and messages
Display prompt
Key: NNN = DNs#; SSS = second DN#; XXX = line number; YYY = second line number
On hold: LINENAM
Outgoing line
Paging ALL
Paging busy
Page choice:
SETS SPKR BOTH
Page timeout
Parked call
CALLBACK
Park denied
Parking full
Parked on: n02
PAGE EXIT
Pickup:
Pickup denied
Pick up receiver
Please wait
Pool code: ___
QUIT
Description of error or action
You have placed one or more calls on hold. The name of the line held the
longest appears on the display.
Line redirection: You are trying to redirect a line and the line you have
selected is the outgoing line you have selected as a destination. You cannot
redirect a line to itself. Select another line.
Page: You are making a page. The display shows the page zone you have
FEATURE
selected. Press
Page: A page is being made in the page zone you have requested.
Page: Select the type of page you want.
Page: The time allocated for paging has expired.
No one answered the call you parked. The call returns to you.
Call park: You have tried to park a conference call. Split the conference and
park the calls separately. The person who retrieves the calls can reconnect
the conference.
Call park: All available retrieval codes are in use. Transfer the call or take a
message instead.
SWCA: No park resources, out of the 27 that are available on the BCM50,
are free. Wait for one to become free, and then try again.
Call park: Record the code shown (n01-n25). Use Page (
press PAGE to announce the call and its retrieval code.
Pickup group: Enter the internal number of the telephone that is ringing. You
can use an internal auto dial button to do this.
If you decide not to answer a ringing call after you have activated Directed
FEATURE
Pickup, press
Pickup groupers is no call to pick up, or the call has been answered or you
have tried to pick up a call on a person's private line.
Trunk Answer: The call that is ringing is on a line that is not in a Ringing
Service.
You have used the Call Queuing feature without picking up the handset.
Auto Handsfree is not assigned to your telephone. You must use the
handset or press the handsfree button to answer a call.
Priority call: The party you are calling has eight seconds to decide to accept
or reject your priority call.
Line redirection: Enter a valid line pool access code.
RLS
or when finished.
.
BCM50 Device Configuration Guide
201
Section 3: Features
FEATURE
60) or