Configuring A New Time Zone On A Remote Ip Telephone - Nortel BCM50 Configuration Manual

230 Global IP features
The buttons on your telephone will mimic the buttons configured on the diverted set. The
diverted telephone indicates that it has been diverted, and it cannot be used until hot desking is
cancelled.
Cancelling hot desking
You can cancel hot desking from either telephone.
Ensure that both telephones are on-hook before cancelling hot desking.
1
Note: There may be up to a 10-second delay after the call ends before
the system will allow you to cancel hot desking. This period can vary,
depending on the call type.
Cancel the feature:
2
Diverted telephone: Press the display key under the CANCEL prompt.
Live telephone:
Access FEATURE *999.
a
b Enter the password.
Press CANCEL.
c

Configuring a new time zone on a remote IP telephone

If the IP telephone connects to the system from a different time zone than the system, you can reset
the telephone so that it displays the correct local time.
At the telephone, enter FEATURE *510.
1
Press CHANGE.
2
Press * to toggle between + and - (minus), depending on which side of the time zone the
3
telephone is located. As a rule of thumb, west is minus (-); east is plus (+).
Enter the number of hours difference.
4
Press OK.
5
N0016866
Section 3: Features