Nortel BCM50 Configuration Manual page 216

216
Section 3: Features
Other conference features:
• Remove yourself from the conference permanently: FEATURE 70.
Note: The other two callers remain connected. (Some external lines may
not support this feature. Ask your System Administrator.)
• Put the conference on hold at one telephone: Press HOLD.
Note: The other two callers can still talk to each other.
• Split a conference: Press the line or intercom button of one caller to consult privately while the
other caller is on hold.
Re-establish the conference: Press FEATURE 3
• Disconnect one party:
Press the line or intercom button of the caller you want to disconnect, then press RLS.
a
b Press the line or intercom button of the remaining caller to resume your conversation.
• Independently hold two calls: Press the line or intercom button of the first caller, then press
HOLD. The second caller is automatically put on hold.
Re-establish the call: Press HOLD to retrieve one call from hold, press FEATURE 3, then
retrieve the second call from hold.
• Release privacy to create a conference call:
With a line programmed with privacy, you can turn privacy off to allow another person with
the same line to join in your conversation and form a conference. All the rules for a conference
apply but there is one line in use, instead of the normal two. This means that you cannot split a
conference set up using Privacy.
Press FEATURE 83.
a
b Tell the other person to press the line button and join your conversation.
Note: Only two BCM50 telephones and the external caller can take part
in this kind of conference.
N0027146 [Publish Date]
Feature configuration: Making calls