Feature Configuration: Making Calls; Blocking User Access To Feature Programming - Nortel BCM50 Configuration Manual

Feature configuration: Making calls

This section describes the features the system user can configure or use to place outgoing calls.
For details about setting up routes and access codes, refer to ...keycode
This section includes:
• "Blocking user access to feature programming" on page 209
• "Protecting outgoing call privacy" on page 210
• "Deal with a busy signal on an internal call" on page 210
• "Other ways of communicating with internal users" on page 211
• "Dialing shortcuts" on page 217

Blocking user access to feature programming

You can block the user from using this feature key by setting the set lock for the telephone to
complete restriction. (Telephony//DN record//restrictions//Set lock)
Under Telephony//DN record, select the DN record for the telephone for which you want to
1
restrict trunk answer.
Click the Restrictions tab.
2
Click the Set restrictions tab in the bottom frame.
3
Beside the appropriate schedule, enter the filter that creates complete restriction.
4
Section 3: Features
BCM50 Device Configuration Guide
209