Capabilities And Preferences - Capabilities Tab; Figure 25 Capabilities And Preferences - Capabilities Tab Panel; Table 28 Capabilities And Preferences - Capabilities Panel Fields - Nortel BCM50 Configuration Manual

102
Section 2: DN records

Capabilities and Preferences - Capabilities tab

Capabilities settings control how the system interacts with individual telephones, and how the
telephones receive calls.
Note: Not all the fields shown below will necessarily appear for any one
type of telephone. Some fields relate to specific models of telephones.
Figure 6 Capabilities and Preferences - Capabilities tab panel
Table 28 describes the fields on this panel.
Table 7 Capabilities and Preferences - Capabilities panel fields
Attribute Values
Handsfree None
Standard
Auto
Pickup group None
1 to 9
N0027146 [Publish Date]
Description
None: The handsfree feature is not available to this telephone (7000 and
7100 digital phones, 2001 IP phones, and any portable handset that does not
have an external speaker).
Standard: The handsfree feature is activated by pressing a button on the
telephone.
Auto: The handsfree feature is activated when the telephone receives a call.
Digital Doorphone note: Before you install the doorphone hardware, ensure
this field is set to Auto in the DN record you want to use for the doorphone.
Note: Handsfree must be enabled on any telephone that allows headsets.
For 7316E digital phones, set Handsfree to Auto.
7406 digital cordless phone: Handsfree must be enabled for this handset to
work.
Speaker volume: Note that the speaker volume returns to the telephone
default setting for each new handsfree call.
Assigns this telephone to a pickup group.
This is a group where all telephones ring until one is answered.
DN records parameters