Autodial; Speed Dialing - Nortel BCM50 Configuration Manual

Feature configuration: Making calls

Autodial

You can program memory buttons for one-touch dialing of internal or external telephone numbers.
When you program an external autodial, you must specify a path out of the system. You can also
program autodial buttons with speed dial codes.
Programming DN records memory buttons for autodial:
DN record//Button programming//
For information about programming memory buttons on the telephone, refer to
memory buttons" on page

Speed dialing

BCM50 provides two types of speed dialing:
• System Speed Dial programming allows you to assign two or three-digit speed dial codes to
the external numbers called most often. You can set the system to have 01 to 70 codes or 001
to 255 codes.
• User speed dial numbers can be programmed during telephone DN record configuration or at
the telephones by the users.
Programming System speed dials
System speed dials are programmed under System//speed dial where you specify the internal or
external dialed number, a name, and whether you want the system to ignore dialing restrictions.
System speed dials:
Provide a list of codes and numbers to your users.
Programming speed dials in the DN record:
DN record, select telephone.
1
Capabilities and preferences.
2
Click the Button Programming tab.
3
Select the button where you want to enter the speed dial code.
4
Enter FEATURE 0 and the system or user speed dial code.
5
220.
Section 3: Features
"Programming
BCM50 Device Configuration Guide
219