Dialing Shortcuts; Last Number Redial - Nortel BCM50 Configuration Manual

Feature configuration: Making calls
Send Hookswitch or DTMF during a conference call
Either system telephone engaged in a three-way conference call over a Network CLID or DS trunk
can issue a hookswitch or DTMF (????????) dialing request without leaving the conference.
Allowing the feature:
System//global//
• If you want the other set to hear DTMF tones during dial, ensure that the Long Tones feature is
active (FEATURE 808).
• If you want to conference in someone through the trunk, use the button marked Link
(FEATURE 71).
Note: This feature is not available for 20XX IP telephones, since they
cannot receive long or short tones.

Dialing shortcuts

Use the following features to save time when dialing:
• "Last Number Redial" on page 217
• "Saved Number Redial" on page 218
• "Autodial" on page 219
• "Speed dialing" on page 219
• "Programming memory buttons" on page 220

Last Number Redial

If the number you want to dial was the last number dialed from your telephone, use this feature to
redial the external number.
Allowing the feature
You allow last number redial for each telephone through the restriction programming.
DN records//restrictions//last number redial
Section 3: Features
BCM50 Device Configuration Guide
217