Capabilities And Preferences Main Tab; Figure 24 Capabilities And Preferences Table Panel; Table 27 Capabilities And Preferences Tabbed Panel - Nortel BCM50 Configuration Manual

100
Section 2: DN records
Attribute Values
Delete 1. On the System DNs table (Line access tab), choose the DN record where you want to
1. On the Answer DNs table, select the Answer DN line you want to delete.
2. Click Delete.
3. Click OK to save the selection.

Capabilities and Preferences main tab

Capabilities settings control how the system interacts with individual telephones, and how the
telephones receive calls.
Preferences control how the telephone itself works. These settings can also be set by users at the
telephones using feature codes.
Figure 5 Capabilities and Preferences table panel
Table 27 describes the fields shown on the main Capabilities and Preferences tabbed panel.
Table 6 Capabilities and Preferences tabbed panel
Attribute Values
DN <read only>
Model <alphanumeric>
Name <numeric>
Prime Line None, Pool (A to O),
I/C (intercom),
Line: <line number>
Intercom keys 0 to 8
N0027146 [Publish Date]
Description
delete Answer DNs.
Description
Refer to "Main panel tabs: common fields" on page
Refer to "Main panel tabs: common fields" on page
Refer to "Main panel tabs: common fields" on page
Choose the first line that the telephone selects when a call is made.
PRI pools are not valid selections for a Prime line.
When you assign a line pool as a prime line, the system searches
automatically for an idle line in the pool.
Doorphone: Before you install the doorphone hardware, ensure that this
line is set to None on the DN record you are assigning to the doorphone.
Assign the number of intercom buttons to a telephone.
Intercom buttons provide a telephone with access to internal and external
lines, and line pools.
Doorphone: Before you install the doorphone hardware, assign one
intercom key to the DN record you are assigning to the doorphone.
DN records parameters
93.
93.
93.