Nortel BCM50 Configuration Manual page 26

26
Section 1: System telephony
Table 4 SWCA controls (Continued)
Attribute/Value
Invoke SWCA parking by Hold
<checkbox>
Include I/C calls when invoking by Hold
<checkbox>
Also refer to:
• Common dialing plan settings
• Timers (Park timeout)
• "Sharing calls by parking on SWCA buttons" on page
• About System Wide Call Appearance (SWCA) keys
N0027146 [Publish Date]
Description
Choose whether calls that are put on hold will automatically
assign to a SWCA key.
If you select the checkbox...
When the user presses Hold, the system attempts to repark the call on the
current SWCA key assigned to the call, or on a free SWCA key programmed on
the telephone.
If no SWCA is currently associated with the call (Automatically - life of call is not
turned on), and there is no free SWCA key to assign to the call, the call remains
on Hold on the line it came in on.
Note: In this case, the call is not available to other telephones in the group until
it can be assigned to a SWCA key or unless they have the same line
appearance as the held call.
If you do not select the checkbox...
There is no interaction with SWCA keys. The call remains on Hold on the line it
came in on and is not available to other telephones in the SWCA group unless
the user manually assigns the call to a SWCA key or unless those telephones
have the same line appearance as the held call.
Choose whether intercom calls put on Hold will automatically
assign to a SWCA key.
If you select the checkbox...
Invoke SWCA parking by Hold must be checked to activate this feature.
When the user makes an intercom call, and puts it on Hold, the call works the
same ways as described in Invoke SWCA parking by Hold, selected.
If you do not select the checkbox...
Intercom calls will be held on the local line, regardless of whether you select the
Invoke SWCA parking by Hold.
If the intercom call was assigned to a SWCA key automatically, you can press
the SWCA key to repark the call and make it available to other telephones in the
group.
If you manually assign the intercom call to a SWCA key, the call is automatically
parked, and it becomes available to the rest of the group.
in the BCM50 Networking Configuration Guide
Global telephony settings
(Call Park codes)
174.
user card