Registering Nortel 20XX IP telephones
The Nortel 20XX IP telephones need to register with the system to be able to use the call features
and system features.
Prerequisite programming:
The following programming must be completed prior to performing this configuration:
•
Numbering plan
•
Lines programming
•
Telephony system feature programming
•
IP telephony network setup/prerequisites checklist
Determining the registration process
Registering 20XX IP telephones to the system is a two-stage process.
•
First you set up the system programming to receive registration under Resources//Telephony
Resources//IP Terminal Global Settings tab.
Networking Configuration Guide
On the IP Terminal Global Settings panel:
Select the checkbox beside Enable registration.
a
b If you want the installers to use a password to configure and register the telephone, select
the checkbox beside Enable global registration password, and then enter a numeric
password in the Global password field.
If you want the system to automatically assign DN records to the telephones, select the
c
checkbox beside the Auto-assign DNs field.
("IP Terminal Global Settings"
)
Section 2: DN records
in the BCM50
BCM50 Device Configuration Guide
117