Nortel BCM50 Configuration Manual page 262

262
Section 3: Features
Table 2 Button Programming Feature settings (Continued)
Set
command
Feature
(FEATURE
<code>)
800 Trunk Answer
801 Call Queuing
802 Group Listening
803 Time
804 Wait for Dialtone
807 Ringing (Signal) Call
808 Long tones
811 Call Information
812 Call Log - View
Information
813 Call Log - Manual
815 Call Logs
autobumping
818 Call Charge Indication Allows the user to view the charges for a call. (available on
819 ONN blocking
82 Camp-on
83 Privacy Control
84 Line Redirection
85 Do Not Disturb
86 Background music
870 Service Mode Status
871 Ringing Service
872 Restriction Service
873 Routing Service
N0027146 [Publish Date]
Description
Allows the user to answer a ringing call placed in a service mode.
Allows the user to answer calls in order when several calls occur
at once. Calls are presented in this order: incoming calls,
timed-out forwarded calls, then camped calls.
This feature opens the microphone on the set to allow a group of
people to hear a call through the telephone speaker, but the user
must talk to the caller through the handset.
Displays the current time.
Places a pause in a dialing string that holds the following digits
until a dialtone is perceived on the line.
Enter FEATURE 807 and an extension to directly ring another
telephone inside the system. This is the same process as
pressing an intercom button and dialing an extension.
Allows the user to specify the type of tones dialed out.
Allows the user to view information about a current call.
Allows the user to view call log information.
Allows the user to manually active call logging.
Allows the user to manually remove the oldest log item.
DASS2 and ETSI Euro trunks only)
Allows the user to block the call information from the telephone
for an outgoing call.
Allows the user to transfer and park an external call to another
telephone in the system.
Allows the user to make a shared line private, or release a shared
line from private control.
Allows the user to redirect a line within the system.
Allows the user to block incoming calls from ringing on the
telephone.
Allows the user to play music provided by a background music
source through the speaker on the telephone.
Allows the user to view the current service mode being used.
Allows the user to change the ringing service schedule.
Allows the user to change the restriction service schedule.
Allows the user to change the routing service schedule.
System features and feature codes