Restrictions Main Tab; Table 34 Restriction Table Fields - Nortel BCM50 Configuration Manual

DN records parameters

Restrictions main tab

The Restrictions settings allow you to control callouts of certain number combinations. These
restriction filters are then assigned to lines and DN records, as required to prevent callers from
making certain kinds of calls from a specific telephone or from lines that are available at the
telephone.
Figure 12 Restrictions table panel
Table 34 describes the fields on this panel.
Table 13 Restriction table fields
Setting Values
DN <read only>
Model
DN Type <read only>
Set lock None
Partial
Full
Allow last number <checkbox>
Allow saved <checkbox>
number
Allow link <checkbox>
Description
Refer to "Main panel tabs: common fields" on page
Refer to "Main panel tabs: common fields" on page
Refer to "Main panel tabs: common fields" on page
Choose the option that sets the amount of programming and customizing the
user can do with this telephone.
None allows access to all features.
Partial prevents:
• programming autodial buttons
• programming user speed dial
numbers
• programming feature buttons
• moving line buttons
• changing the display language
• changing dialing modes
(Automatic, Pre-, and Standard
Dial)
• using Voice Call Deny
• saving a number with Saved
Number Redial
Allow or disallow access to the Last Number Redial feature.
Allow or disallow access to the Saved Number Redial feature.
Allow or disallow access to the Link feature, which is a host signaling option.
Section 2: DN records
93.
93.
93.
Full restricts all the Partial settings,
plus:
• changing background music
• changing Privacy
• changing Do Not Disturb
• using Ring Again
• using Call Forward all calls
• using Send Message
• using Trunk Answer
• activating Services
BCM50 Device Configuration Guide
113