Nortel BCM50 Configuration Manual page 196

196
Section 3: Features
Display prompt
Key: NNN = DNs#; SSS = second DN#; XXX = line number; YYY = second line number
Feature code:
QUIT
Feature moved
<Feature name>
SHOW OK
Feature timeout
Forward>NNN
CANCL
Forward denied
Hidden number
Hold or release
Inactive feature
Incoming only
In observe:
Monitor
Intercom #: ___
QUIT
Intercom
In use:XXX
N0027146 [Publish Date]
Description of error or action
FEATURE
Feature button: Press
assign to the button. Check that the code is valid.
Feature button: You have programmed a button with a feature programmed
on another button. The feature has moved to the button you just
programmed. The original button is now blank.
Button inquiry: The name of the feature assigned to a button appears on the
display when you press the button. Press # or SHOW for additional
information.
You took more than 15 seconds to press a button in response to a display.
Call forward: Your calls are being forwarded to telephone NNN.
Call forward: There are several reasons why you can get this message. For
example, you cannot forward your calls to a telephone that has Call Forward
programmed to your telephone.
The last number you dialed or the number you saved for Saved Number
Redial was a speed dial number that displayed a name instead of the
number. You dialed the number correctly, but it is not visible.
While on a call, you must either release the call or put the call on hold before
you can program a feature button.
SWCA: The requested SWCA code already has a call parked on it. Choose
another key position.
You entered the feature code for an application that is disabled.
The line you are trying to use to redirect calls is for incoming calls only.
Select an outgoing line.
Silent monitor: The hunt group member is already being monitored.
Auto dial: Enter the internal telephone number you want to program.
Line redirection: You selected the intercom button as the facility on which to
place the call. Enter a line pool code or a destination code.
You tried to program redirection while the feature is in use. Only one person
can program line redirection at a time.
SWCA: The requested SWCA code is being used by telephone XXX.
Choose another key position.
Message: You are trying to call from your message waiting list. The line that
you are trying to use is in use by the identified user in your system.
Display prompts and messages
and enter the feature code you want to